Bushing, 15 x 10.5mm Peek Plastic
This is the Technopolymer (Peek Plastic) steam bushing used in the Slayer Espresso and Steam Range of Espresso Machines. Older versions of Slayer Espresso used a PTFE Teflon version of this bushing which has been replaced with Peek version. This bushing also requires an o-ring which can be found here.
PID Controller for Brew Tanks, Fuji This Fuji PID is used to control the Brew Boiler temperature in the Slayer Espresso V3 Espresso Machine. It i...
View full details
Slayer - O-Ring for Teflon Steam Valve Bushing This is the o-ring to go with the Peek Bushing (15 x 10.5mm) used in the Slayer Espresso and Steam...
View full details
Slayer - Pressure Transducer Assembly, ELTEK This is the upgraded version of Transducer for the Slayer Steam (Steam, Steam X) that replaces the H...
View full details
Slayer - ELTEK Pressure Transducer Tube, Steam This is the upgraded version of the transducer copper tube for the Slayer Steam (Steam, Steam X, E...
View full details
Slayer - Thermostat, 110C This is the Slayer Brew Tank thermostat. This is used across the entire Slayer Espresso and Slayer Steam range of Espre...
View full details
