This is the upgraded version of the transducer copper tube for the Slayer Steam (Steam, Steam X, EP, LP, LP X) that positions the Eltek transducer further away from the Steam boiler. You will need to purchase this copper tube if you are upgrading from the Honeywell transducer assembly to the Eltek transducer.
Please note that for this Transducer upgrade you will also need to upgrade the firmware on the board to allow the Transducer software to read both PSI and Bar pressure. It also requires a new wiring loom to connect the Eltek to the board. Please contact us on firstname.lastname@example.org if you are planning to upgrade your Slayer transducer to discuss this upgrade path.