This is the upgraded version of Transducer for the Slayer Steam (Steam, Steam X) that replaces the Honeywell Transducer used in earlier builds of Steam and Steam X. This is the current transducer used in EP, LP and LP X.
Please note that for this Transducer upgrade you will also need to upgrade the firmware on the board to allow the Transducer software to read both PSI and Bar pressure. It also requires a new wiring loom and copper tube to connect the Eltek to the board. Please contact us on firstname.lastname@example.org if you are planning to upgrade your Slayer transducer to discuss this upgrade path.