More Info - Kees Van Der Western Spirit

 Idro - Matic

_______________

This adjustable progressive pre-infusion cylinder offers a wide variation of starting pressures to play with.

This new system is retro-fitable to most existing machines.

 Touchpad

_______________

Each group can be activated with 4 easily programmed volumetric buttons, or a continuous flow button.

 Bastone

_______________

Each group is activated by one of our custom “Bastones”, a small lever which offers two programmable volumetric settings and, via a pushbutton, a continuous flow.

The Bastone can also be programmed for full manual control.

 Crackle Black Frame

_______________

The frame is finished with a crackle black powder coating.

A rigid and easy to clean finish.

 Raw Frame

_______________

The stainless steel frame is left in its original raw state and is lightly sand papered to create a slightly rough and raw look. 

 Raw Body Panels

_______________

The body panels are brushed in a single direction giving your machine a raw but stylish look.

 Polished Body Panels

_______________

The 2 mm thick stainless steel body panels are polished for a shiny effect.body panels are brushed in a single direction giving your machine a raw but stylish look.

 Crackle Black Body Panels

_______________

The stainless steel body panels are finished with a crackle black powder coating.

This durable finish creates a striking contrast between the bodywork and the polished parts.

 Body Panels in Custom Colours

_______________

The stainless steel body panels can be coated with a RAL colour of your choice, and in the finish of your choice, smooth or textured, and gloss, silk or matt.

 Iiluminated Rear Panel with Spirit Logo

_______________

The Spirit design is printed on the illuminated rear panel.

The LED lighting can be switched on or off.

 Iiluminated Rear Panel with Custom Design

_______________

Whether it’s a logo, a full colour design or a combination of the 2, any custom design will look awesome on the illuminated rear panel.Spirit design is printed on the illuminated rear panel.

 Lungo Optimization

_______________

The Spirit is dedicated to deliver the best possible espresso extraction. If you prefer lungo over espresso we can alter your machine to optimise the pre-infusion for lungo’s.

This can be altered per group individually.

 Temperature Controller in Fahrenheit

_______________

The temperature in all our boilers is controlled by a PID; a self-learning device that keeps the temperature as stable as possible.

Your machine can be delivered with the readout in either degrees Celsius or Fahrenheit.

 Pump Controller

_______________

The temperature in all our boilers is controlled by a PID; a self-learning device that keeps the temperature as stable as possible.

Your machine can be delivered with the readout in either degrees Celsius or Fahrenheit.

 Espresso Cup Elevator

_______________

Adapt your drip tray for espresso cups quickly and easily.

This option brings cup and machine closer together.

 Pitcher Tray

_______________

Extra room for your milk pitcher before, during and after steaming.

Easily adjustable in height and available for the left- and right-hand side of the drip tray.

 Ivory Coloured Detail

_______________

Group caps, filter holder handles & if so equipped Bastone lever knobs made of ivory coloured material. You can also choose a combination of red & ivory, to distinguish between group and steam lever.